Circulating pump Wilo-Star-RS 15/6 For Solar Water Heater

Home

Solar collector

1. Heat pipe solar collector

2. U type series

3. Non-pressure series

4. Flat plate solar collector

Non-Pressure Series

1. Aluminium alloy

2. Galvanized steel plate

3. Stainless steel plate

4. Two Pipes Inlet-Outlet

Pressure Series solar

1. Pressurized solar water

2. Pre-heated solar heater

Split Solar Water heating

1. No coils

2. With one coils

3. with two coils

Flat split solar heating

1. Pressurized solar water

2. Non-Pressure solar heater

vacuum tube

1. Normal vacuum tube

2. Three-target tube

3. Heat-pipe vacuum tube

Accessories

1. Pressurized Water Tank

You are here: Solar Products >Solar Accessories > Circulating pump

Circulating pump

Circulating pump
Model: RS 15/6

Circulate Pump For Solar Heating Systems

Circulate Pump
series specifications
Star-RS 15/6
heating circulating pumps, wet runner motors
RS/RP=Compression fitting pump(Star-RS)
RSL=Air venting pump
RSD=Double pump
Nominal width of the pipe connection 15[mm](15/)
Maximum lift [m]at Q=0m3/h (6)

Pump curves

Dimension drawing

Motor horizontal
Terminal box positions for 3, 6, 9 and 12 o'clock possible
On delivery, terminal box position is at 3 o'clock

Terminal diagram

Blocking current-proof motor

										    Single-phase motor (EM) 2-pole - 1~230 V, 50 Hz

									      With built-in capacitor

                                            
                                              Energy efficiency class 
                                               
                                              EEI Class
                                              C  

                                              Approved fluids (other fluids on request) 
                                               
                                              Heating water (in accordance with VDI 2035) 
                                              •

                                              Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data must be checked)    
                                              •

                                              Permitted field of application 
                                               
                                              Temperature range for applications in heating, ventilation & air-conditioning systems at max. ambient temperature of +40 °C
                                              • 

                                              - 10 to + 110 °C 

                                              Maximum permissible operating pressure   
                                              Pmax       10  bar
                                            
                                              Pipe connections
                                               
                                              Screwed connection 
                                              1" 

                                              Thread   
                                              G 1

                                              Overall length
                                              130  mm 

                                              Motor/electronics 
                                               
                                              Electromagnetic compatibility   
                                              EN 61800-3 

                                              Emitted interference   
                                              EN 61000-6-3 

                                              Interference resistance   
                                              EN 61000-6-2 

                                              Power electronics

                                              − 

                                              Protection class
                                              IP 44 

                                              Insulation class
                                              F 

                                              Mains connection   
                                              1~230 V, 50 Hz 

                                              Nominal motor power  
                                              P2  38.0 / 21.0 / 11.0  W 

                                              Speed  
                                              2480 / 2750 / 2840  rpm 

                                              Power consumption 
                                              1~230 V  P1  30-43 / 43-61 / 67-84  W 

                                              Current at 1~230V  
                                              0.20 / 0.28 / 0.36  A 

                                              Motor protection   
                                              Not required (blocking-current proof) 

                                              Threaded cable connection
                                              PG  1x11

                                              Materials 
                                               
                                              Pump housing   
                                              Grey cast iron (EN-GJL-200) 

                                              Impeller   
                                              Plastic (PP - 40% GF) 

                                              Pump 
                                              shaft   Stainless steel (X40Cr13) 

                                              Bearing
                                              Carbon, metal impregnated 

                                              Minimum suction head at suction port [m] for preventing cavitation at water pumping temperature 
                                            
                                              Minimum inlet height at 50°C/95°C/110°C
                                              0.5/3/10  m 

                                              Information for order placements
                                               
                                              Make
                                              Wilo 

                                              Type   
                                              Star-RS 15/6 

                                              Weight approx.  
                                              2.31  kg

                                            
                                                Place of Origin
                                                China
                                                Model Number
                                                Circulate Pump
                                              

                                                Price Terms
                                                FOB, CIF 
                                                Brand Name
                                                WILO
                                              

                                                Payment Terms
                                                T/T, L/C 
                                                Minimum Order
                                                1 sets
                                              

                                                Supply Ability
                                                2,500sets/month 
                                                Delivery Time
                                                7 days
                                              

										    
										    